NRG Events Technology - SMM » agenda china nuclear training simulation 2014NRG Events

Should your tutor has certain demands for those format of your own exploration newspaper, check them before preparing one last draft. The most frequent formatting is shown here. Whenever you send in your paper, make sure you have a protect replicate. This list of will work reported shows up at the conclusion of the pieces of paper, after any endnotes. Start off their list with a new web page. The list has got the same functioning top of your head when the principal text. The page numbering during the jogging head persists uninterrupted through. One example is, if the text message within your research paper while using the supplied themes. So that you can stimulate and permit writers to completely cite and make on preceding do the job, the research section of paperwork could optionally carry on past the 8 page minimize for a couple of extra pages of content. Papers that do not conform to the newsletter guidelines cannot be approved for analysis and will also be given back towards the creators.

28th – 29th – 30th May 2014 Shenzhen – China

Day One: 28th May

08.30 – 09.00
Morning coffee and registration exhibiting area

09.00 – 09.10
Opening remarks from our Chairman

A Turnkey Input/Output System Replacement on the Daya Bay Full Scope Simulator – Gregory Zakaib – Deployment Manager – L-3 MAPPS

  • Introduction
  • Review of the Legacy I/O System
  • Project Scope Review
  • Using a Compact I/O Solution to Replace the Legacy System
  • Project Status
  • Conclusions

Usages of the Ling Ao Phase II DCS-based Full Scope Simulator – Ma De You – Daya Bay Nuclear Power Operations & Management Co.

  • Introduction of LAII FSS
  • Important issues feedback from simulator during the commissioning of nuclear power plant
  • First CPR1000 SOP digitization procedures implementation
  • DCS HMI continuous improvement
  • Independent verification of RPS software
  • Power plant DCS functional verification
  • Nuclear power plant fully functional digitization procedures
  • Based on full-scope simulator developed severe accident simulator
  • Based on full-scope simulator developed multi-functional simulator
  • Question 1, the feasibility for Real-time tracking of plant operation simulator
  • Question 2, the feasibility for Simulator application of human factors engineering

Coffee, exhibition and networking sessions

Development of China Lead Alloy Cooled Reactor Simulator – Peng XU – – PhD – FDS


Benefits of Playing Synergistic roles as Training Center and Global Simulator Manufacturer
– Norberto Rivero – Deputy Manager Control Rooms & Simulation Safety, Operation and Training Services – Tecnatom

Tecnatom, a Spanish company owned by the main electrical utilities since 1973 , was set up with the goal of being the reference nuclear training centre in Spain. In the late seventies two full scope nuclear simulators were purchased in the USA market, since then Tecnatom has developed its own technology and become a global simulator vendor. This presentation shows this evolution, the current situation as well as the benefits of playing synergistic roles as training and operation support services provider and simulation vendor.

Lunch and networking sessions

Development of a CPR1000 Severe Accident Simulator for China Nuclear Radiation & Safety Centre using RELAP5 and MELCOR – Wei Huiming – Senior Engineer – CNPSC – Vladimir Nosatov – Principal Engineer – WSC

Aims and objectives of CPR1000 Severe Accident Simulator application in NSC – Feng JinJun – Zou Moyuan – China Nuclear Radiation & Safety Centre

Coffee, exhibition and networking sessions

15.15 – 15.45
Advanced Solution to Support Post-Fukushima Emergency Planning and Training Needs – Steven Freel – COO – GSE

HTGR simulator and the progress of developing other simulators – Sun Jun – PhD Associate Professor – INET Institute of Nuclear and New Energy Technology – Tsinghua University

Cocktail Reception sponsored by L-3 MAPPS: We will end the day with a special networking session.

Day Two: 29th May

08.30 – 09.00
Morning coffee and registration exhibiting area

09.00 – 09.10
Opening remarks from our Chairman and Brian Tjon, NRG Events

Development of web based intelligent tutoring applications for a generic PWR simulator – Guia Utmel – Director of Technology – WSC

Development of advanced nuclear software and digital nuclear reactor in FDS – Yuetong LUO – Associate Professor – FDS

Coffee, exhibition and networking sessions

So you bought a new simulator. What next? – Eric Hinkler – Westinghouse

Benefitting from EPRI’s Modular Accident Analysis Program on the Ling Ao Phase II Full Scope Simulator – Robert Boire, Yin Choy Lim – L-3 MAPPS

  • Introduction
  • Synopsis of Severe Accident Simulation (SAS) projects by L-3 MAPPS
  • EPRI’s Modular Accident Analysis Program (MAAP5)
  • Implementation on China’s Ling Ao Phase II Full Scope Simulator
  • SAS Validation and Test Results
  • Use of SAS for Severe Accident Management Guidance
  • Conclusions

R&D activities in CGN – Xiao Min – Assistant to Vice President – CNPRI

Lunch and networking sessions

Panel Discussion: Long term Maintenance and Upgrades for Simulators

  • Michael Chatlani – Chair – L-3 MAPPS
  • Ma Deyou – DNMC
  • Zheng Wei – Tianwan NPP
  • Steve Freel – GSE Systems
  • Guia Utmel – WSC

The Development and Applications of Simulation Technology under the New States of China NPP – Mr. Li Qing – CNPO China Nuclear Power Operation Technology Corporation

  • The new NPP safety demands call for the new requirement of training and simulation technology
  • The rapid development of CHINA NPP makes the diverse requirements of training and simulation technology
  • The applications of simulation technology in other domain of NPP engineering

Coffee, exhibition and networking sessions

Shareworx- the Total Solution for Nuclear Projects’ Documents and Data Management – Mr. Dong Qin – DMS Corporation

Shareworx- the solution developed by DMS for the integration of engineering documents and data, which takes the world-renowned content management platforms such as Documentum as the basic platform and takes advantage of its great abilities in mass storage, security management, rapid positioning, information sharing and content correlation, etc. , be able to provide strong support for constructing and integrating the engineering document data management platform. Also, Shareworx can provide a strong support for developing the business in the future. Shareworx adopts the service-oriented system structure, and can guarantee the management and utilization of document data in every project stage. Meanwhile, it can realize the circulation and reuse of the full life cycle, namely, the data is input just one time, but can be used by multi parties, and thus can maximize the value of the engineering document data. According to the different stages of the project, Shareworx can automatically do the workflow and protection of the engineering document data. In the time of achieving the systematic management of the project database, archive database and the knowledge database, the uniqueness and effectiveness of the document data could be ensured by Shareworx.

COSINE integrated platform user experience design – Ms. Yang Yanhua – SNPSDC State Nuclear Power Software Development Center

Conclusion of day 2: We will end the day with a special networking session. This will be the perfect platform to evaluate the past two days.

Day Three: 30th May

Visit to the CNPSC Simulation Center and CNPRI Large equipment test facility. Both facilities are in Llonggang – about 20-30 minutes from the hotel in Shenzhen. NRG will arrange transport. The Visit is Sponsored by WSC and organized together with CNPSC, CNPRI and NRG Events. Schedule details as follows:

  • 12:15 – Gathering the group of maximum at the lobby of the Panglin Hotel
  • 12:30 – 13:30 Transport to CNPRI
  • 13:30 – 14:30 Visit at CNPRI
  • 14:30 – 15:00 Transport from CNPRI to CNPSC
  • 15:00 – 16:00 Visit at CNPSC
  • 16:00 – 17:00 Transport back from CNPSC to Panglin Hotel

Latest News

L-3 MAPPS to Supply Full Scope CANDU Simulator for Wolsong Unit 1


MONTREAL, April 12, 2016 – L-3 MAPPS announced today that it has secured a contract from Korea Hydro & Nuclear Power Co., Ltd. (KHNP) to supply the full scope operator training simulator for the Wolsong Unit 1 (Wolsong 1) nuclear power plant. The project will start immediately, and the simulator is scheduled to be completed […]


L-3 MAPPS to Upgrade Slovenia’s Krško Full Scope Simulator


MONTREAL, April 7, 2016 – L-3 MAPPS announced today that it signed a contract with Slovenia’s Nuklearna elektrarna Krško (NEK) to upgrade the full scope simulator for the Krško Nuclear Power Plant. The simulator upgrade is part of NEK’s Safety Upgrade Program (SUP) to modernize the plant to prevent severe accidents and to mitigate consequences […]


The Generic VVER-1200 Simulator is declared as Ready For Training


Training for Viet Nam representatives was completed successfully in accordance to training plan agreed between parties. Simulator installation and Site Acceptance Test (SAT) were completed successfully in accordance to the SAT procedure agreed between parties in advance. Western Services Corporation through the IAEA contract held a two weeks training and site acceptance test of the […]


Simulator delivered for China’s HTR-PM


WSC licensed CNPSC and INET (Tsinghua University’s Institute of Nuclear and New Energy Technology) to develop the simulator. Within 3KM, WSC modified Flowbase to include Helium (He) as the heat transfer medium as well as developing the heat structure in Flowbase. WSC was responsible for supporting integration of the reactor model in 3KM that was […]


L-3 MAPPS Takes Part in Opening of Upgraded Sizewell B Simulator


MONTREAL, February 17, 2016 – L-3 MAPPS announced today that it participated in the official opening of EDF Energy’s upgraded Sizewell B plant training simulator on January 21, 2016 in Suffolk, U.K. The ceremony was attended by numerous EDF Energy representatives, including Jim Crawford, Sizewell B station director. L-3 MAPPS’ team was led by Michael […]


L-3 MAPPS to Upgrade Cernavodă Simulator’s DCC Emulation


MONTREAL, January 21, 2016 – L-3 MAPPS announced today that it has won an order from Societatea Nationala Nuclearelectrica S.A. (“SNN”), a Romanian-based state-owned utilities company, to upgrade the Cernavodă full scope simulator’s emulation of the plant Digital Control Computers (DCCs). DCC systems are used to monitor and control the major reactor and power plant […]


GSE Awarded Over $17.5 Million in New Contracts Projects Span Major Energy Markets


SYKESVILLE, MD – October 1, 2014 – Global energy services solutions provider GSE Systems Inc. (NYSE MKT: GVP) (“GSE” or the “Company”) today announced the receipt of multiple contracts with an aggregate value of over $17.5 million. The new awards include nuclear, fossil, and oil and gas projects in Africa, Asia, Europe and North America. […]


Holtec International SMR Awarded WSC multiple Simulation Assisted Engineering (SAE) Projects in support of the Holtec Small Modular Reactor SMR-160.


Since early 2012, WSC has worked actively to support the Holtec Internation Small Modular Reactor SMR in developing a test bed for this advanced small nuclear power plant. The latest award, which includes the 3KEYMASTER Modeling Tools, is a follow up to Holtec’s purchase of 3KEYRELAP5 Environment and Software in 2012. The primary goal of […]


WSC Awarded a Full Scope Replica Touch Screen Control Room Simulator based on the WSC 3KEYTOUCH Product Line


*H.B. Robinson Nuclear Power Plant CRGTS under construction Duke Energy, H.B. Robinson Nuclear Power Plant is undergoing a major plant upgrade to replace their existing turbine controls with a new distributed control system (DCS). To provide a means to train the plant operators on the new DCS prior to the system implementation in the plant, […]


The First APR1400 Simulator Delivered to UAE ENEC Barakah Nuclear Power Plant


*ENEC Barakah Simulator “FSS1” Korea Electric Power Corporation (KEPCO) was selected by the Emirates Nuclear Energy Corporation (ENEC) to provide four (4) Advanced Pressurized Water Reactor (APR1400) Nuclear Power Plants for the United Arab Emirates (UAE). As part of this massive project, Korea Hydro Nuclear Power (KHNP) and Western Services Corporation (WSC) are responsible for […]


Hungary`s PAKS NPP Training & Simulation Center exclusive Tour


We are very proud to announce PAKS NPP as an Strategic Partner at the “3rd Annual European Nuclear Power Plant Simulation Forum¨ on the 24th – 25th – 26th of September 2014. The event will take place in the beautiful city of Budapest at the 5 stars venue Sofitel Chain Bridge Hotel which by the […]


Seminar and Training on Scaling Uncertainty and 3D Coupled Code Calculations in Nuclear Technology


The 3D S.UN.COP 2013 in Barcelona, Spain will be the fifteenth seminar of its kind organized since 2004. The Seminar will provide a transfer of experience and know-how from recognized experts in the fields of Best Estimate Plus Uncertainty methods, Scaling Analysis, System Thermal-Hydraulic calculations including 3D Neutron Kinetics Coupling techniques. Licensing aspects in connection […]


Tecnatom’s Full Scope Simulators & Severe Accident. A different training approach


Tecnatom completed the integration of a severe accident module into the Almaraz Nuclear Power Plant Classroom Simulator. The severe accident module is based on the Electric Power Research Institute’s (EPRI) Modular Accident Analysis Program, MAAP4(*). This code allows the calculation of the progression of a severe accident in a nuclear power plant, up until a […]


Memories: Nuclear Training & Simulation China Forum 2013


On the 20th and 21st of June 2013 NRG Events hosted the very first Nuclear Training & Simulation China Forum. The event took place in the amazing 5-star Peninsula Hotel in Beijing After meeting with and talking to some of the key people and organizations in the Chinese Nuclear Industry, we found out that there […]


Simulator for Shandong NPP Unit 1 Ready for Operator Training


Lately Westinghouse completed its turnover of Unit 1 simulator to CPI’s Shandong Nuclear Power Company, marking a new milestone for Haiyang NPP that Unit 1 simulator is ready for operator training. The simulator of Haiyang NPP Unit 1 is based on engineering data of Unit 1 & 2 and engineered and manufactured by US-based Westinghouse. […]


China: First AP1000 operators get training on GSE Simulators


Source WNN: The simulators, supplied by GSE Systems (LEAD Sponsor at the “Nuclear Training & Simulation Forum” Beijing 20th – 21st June), are housed in replica control rooms at the Sanmen and Haiyang sites. They use the same instrumentation and controls as will be used in the actual operator workstations. So far, 34 prospective […]


China Nuclear Human Capital: Where to Find the Staff ?


Source: China is facing a major dilemma in finding the skilled human resources needed for safe nuclear expansion. To accomplish its goals, China needs to train labor to build the plants to a proper standard, educate engineers in plant design, train operators to run the many plants it has planned and staff its regulatory […]


China Is Paving a New Nuclear Path. The way forward on nuclear power is pretty clear: It’s in China.


Author: Jeffrey Ball Today, most nuclear energy is produced in the industrialized world. But that’s changing fast, and the change will have big geopolitical repercussions. Germany and Japan, two longtime nuclear stalwarts, are pursuing nuclear phaseouts sparked by the Fukushima nuclear disaster. In the U.S., a “nuclear renaissance” predicted just a few years ago by […]


Two more reactors under way in China


Source: Work on two new nuclear power reactors was inaugurated on 26 December – just 11 days after a ceremony for the start of work on six other units. The latest units to officially enter the construction phase are at Fangjiashan, near the existing Qinshan nuclear power plant in Zhejiang province. That region of […]


NRC proposes first post-Fukushima safety standards


The U.S. Nuclear Regulatory Commission (NRC) on Feb. 17 proposed three rules to address safety-related issues following the disaster at the Fukushima Daiichi nuclear power plant in Japan. The rules, the first since the NRC established its task force to recommend safety enhancements at all U.S. nuclear plants, were proposed to commissioners in a memo […]


Groups sign agreement to build and operate Poland’s first nuclear power plant


Polish companies Polska Grupa Energetyczna SA (PGE), KGHM Polska Miedź SA, Tauron Polska Energia SA and Enea SA, said they will prepare a draft agreement for the acquisition of shares in PGE EJ 1 sp. z o.o., a special purpose company directly responsible for the preparation of an investment process for the construction and operation […]


EnergySolutions moves into next phase of Fukushima Daiichi nuclear power plant clean-up contract


EnergySolutions (NYSE: ES) on Sept. 12 said it has entered into the second phase of its contract with Toshiba Corp. as part of the on-going remediation of the damaged Fukushima Daiichi Nuclear Power Plant in Japan. Previously selected in March as the technology provider for the clean-up of the large volume of radioactively contaminated water […]


Construction milestone met at Chinese nuclear power project


Construction of two Areva EPR reactors at the Taishan nuclear power station in China reached a new stage of development Sept. 12, EDF and Areva said. The owner and future site operator, Taishan Nuclear Power Joint Venture Co. (TNPJVC), which is 30 percent owned by EDF and 70 percent owned by its Chinese partner, the […]